Organization Chart


Organization

  • National Building Material Lab is registered under micro scale services; MSME Udyog Aadhar number CG14D0002772 dated 14th Aug 2017. We are in need of panel for different govt./Non Govt.
  • It is ensured that management systems developed at National Building Material Lab meet the requirements of ISO / IEC 17025:2005 and NABL and satisfy needs of customers and regulatory authorities. The test methods follows are as per ASME, DIN and IS standards, which satisfy the needs of customers.
  • All the testing is carried out in its permanent facility located in
    RAIPUR-BILASPUR ROAD, URKURA CHOWK, BANJARI MANDIR, VENU PETROL PUMP, BESIDE AKASHWANI RADIO STATION, RAWABHATA, RAIPUR (C.G.) - 493221
    The laboratory conducts the test in its permanent facility having more than 2000sq. area on the ground for its operation and partly away from its permanent facility i.e. at site.
  • National Building Material Lab is an independent organization and conduct independent testing of received samples and ensures that there would be no influence of customer or any other outside personnel on laboratory functioning. If any time such a situation ever occurs this is resolved by management on top priority.
  • Director, National Building Material Lab has overall responsibility of laboratory. The technical staff is qualified, experienced and well trained to take responsibility of day-to-day testing. Laboratory personnel are authorized to access management system documents. Laboratory personnel have been provided resources to carry out their duties and to identify the occurrence of departures from the quality system or procedures for performing tests including initiating action to prevent / minimize such departures.
  • National Building Material Lab ensures that laboratory personnel are free from internal and external commercial, financial influence which can adversely affect quality of their work.
  • The laboratory deals with testing of received samples from customer, professional secrecy and confidentiality is maintained for the testing work received from customer. During electronic storage / transmission of results, care is taken to protect the integrity of results. Laboratory does not reveal specific customer information / property rights to any other customer for any other purpose other than testing request received from customer. Adequate steps are taken & procedure have been adopted to ensure protection of customer confidential information and proprietary rights.
  • National Building Material Lab personnel are not involved in any other activity that will diminish confidence in competence, impartiality, judgment or operational integrity. Laboratory had obtained written undertaking from all testing personnel with respect to impartiality and integrity of testing results furnished by them.
  • Respective laboratory is headed by Quality Manager and ably assisted by Technical Manager, Chemist, Dy.Q.M., Dy.T.M., and Technical Asst. as shown in figure-

    Director

Director is head of the laboratory and responsible for providing adequate Resources to enable effective implementation and approval of management System. He has overall control of laboratory and chairs the management Review meeting. He reviews and approves management system documents.

    Director Operation

She is overall incharge of Administrative department of the lab. In consultation With Quality Manager approves purchase request for adequacy of the specified requirements. She is also responsible for extending full co-operation with customer's request. For any customer complaint approves the investigation procedure & corrective action plan. Ensures the continual improvement procedure is effective. Under her supervision the accounts department maintains all the records of purchasing, storing and issuing service and supplies.

    Quality Manager / Deputy Quality Manager

The Quality Manager / Dy. Quality Manager are responsible for ensuring that processes needed for their Quality Management System are established, implemented, and maintained to requirements of ISO / IEC 17025 accreditation. Areas of responsibility include control of management system documentation, facilitating internal / external audits. The Quality Manager / Dy. Quality Manager Coordinates requests for corrective and preventive action, follow up, and analysis of quality data. The Quality Manager/Dy.QM are responsible for selecting arranging and coordinating the lab participation in inter-laboratory comparison programs. Quality Manager is responsible for scheduling and conducting Internal Audit.

    Laboratory In-charge/Technical Manger ( Mechanical)

Overall control of building material testing laboratory & has total responsibility with respect to performing testing and also planning of test and evaluation of test results. He is also responsible for opinion and interpretation of test results whenever needed. He decides competency of the personnel for specific job. He is officiated as Technical Expert of the Lab. He idenfies training needs of laboratory personnel. He is responsible for assuring internal & external Quality Controls checks like preparation of inter quality checks, intermediate checks and estimation of uncertainty of measurement.

    Technical Manager (Chemical)

Technical Manager (Chemical) is responsible for the overall direction and administration of the testing activities for the Chemical laboratory. He is also responsible for the implementation and execution of the management system within laboratory and ensure that service and support personnel are trained and qualified to perform their assigned duties. Technical Manager is responsible for the timely implementation of corrective and preventive actions and for ensuring that quality manager is notified, when applicable, of system deviations, failures, and deficiencies. Technical Manager has responsibility and authority for technical operations.

    Site Incharge NDT

Site Incharge NDT is responsible for the routine supervision of testing. They also supervise testing of retain samples and maintain the statistics, ensure that the technicians are aware of all the essential steps of test methods, housekeeping, recording test results & report to GM

    Technical Assistant NDT

Under supervision they carry out their duties having knowledge and experience commensurate required to perform the test.

    Chemist

To carry out the testing as per the test method for construction parameters construction water and Admixture analysis. Supervise the activities carried out by Lab Analyst of samples. Maintain all records of test, calibration, maintenance, etc required as per the system. Carryout equipment maintenance as per the instructions of Technical Manager. Carry out the planned activities as per the schedule.

    Technical Assistant (Mechanical)

To carry out the testing as per the test method for UTM machines, construction parameters & Supervise the activities carried out by Lab Analyst. Maintain all records of test, calibration, maintenance, etc required as per the system. Carry out equipment maintenance as per the instructions of Technical Manager. Carry out the planned activities as per the schedule.
  • Technical Manager, Quality Manager and Site Incharge provide adequate supervision on Laboratory's/Site quality system, testing activities and technical operations are closely supervised by these authorities.
  • Lab Incharge/Technical Manager is authorized to raise the indent for arrangement of resources. Director, NBMTL is responsible for providing required resources to Laboratory.
  • Laboratory has appointed Quality manager Mr. Lokesh Kumar, who in addition to his other responsibilities is responsible for development, implementation and monitoring of quality management system in laboratory.
  • Deputy to Key personnel have been identified and mentioned in individuals Job Description.
  • Laboratory personnel are made aware of the relevance and importance of their duties as to how they should contribute about the achievement of the objectives of the management system. This is done by training and awareness sessions, motivation and delegation of authorities, regular interactions and through management review meetings.

    Chemist

To carry out the testing as per the test method for construction parameters construction water and Admixture analysis. Supervise the activities carried out by Lab Analyst of samples. Maintain all records of test, calibration, maintenance, etc required as per the system. Carryout equipment maintenance as per the instructions of Technical Manager. Carry out the planned activities as per the schedule.